Filter
Top Products
31 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
Adding Multiple Devices
If there are several devices to be added, then adding them using the Add Multiple Devices dialog is easier and more
efcient than adding one by one using the Add Single Devices function.
To add multiple devices to the device tree, use either the Devices menu, or right-click an item in the device tree and
select Add Multiple Devices... , or click the toolbar button. The Add Multiple Devices dialog will appear. Select the
type of display and connection to be added from the tabs at the top.
!Note: Large-screen displays that are daisy-chained via RS232 must be added as a single device, and cannot be added using
Multiple Devices. The only exception is when using the RS232 WMI Provider which will automatically add all connected
displays when the host computer is added.
The Add Multiple Devices dialog consists of a tab page for each supported device type:
• Windows computers
• NEC large-screen displays
• NEC projectors
Begin by selecting the tab for the type of device to be added.
The procedure for adding multiple devices can be divided into 3 main steps:
1. Import a list of potential devices
2. Verify the devices to add to the device tree
3. Choose a location in the tree and add the devices
2
1
3