Filter
Top Products
28 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
If the Monitor ID of the display is not known, then leave the Monitor ID selected to Auto Detect, otherwise select the
Monitor ID of the display as congured on the display’s OSD.
If the large-screen display connected to LAN also has other displays daisy-chained from it, then select This is the rst
display in a daisy chain and select the lowest Monitor ID in the daisy-chain. Next enter the Total number of displays
in the daisy-chain.
!Note: When using daisy-chains, the Monitor IDs must be numbered uniquely and sequentially.
Click Test to conrm the network connection and display detection. If the connection for a single display is successful,
then the model name will be automatically entered into the Device Name using the default device naming format. If the
connection for multiple displays is successful, Daisy Chain Host will be automatically entered as the device name. The
Device Name is the name used to identify the display in the device tree, and can be edited if desired before it is added
to the device tree, or later on by renaming the device in the device tree.
!Note: Changing the Asset Tag portion of the device name will not change the Asset Tag stored in the display. To change
the Asset Tag of the display, select Asset Tag from the Display Device Information list group in the controls shown in the
Custom tab of the Device Properties window.
Click OK to add the display(s) to the device tree.
Troubleshooting
If an error occurred when performing the Test operation, see the troubleshooting steps “Problem: Unable to communicate
with an NEC large-screen display” on page 135.
About Daisy Chain Hosts
When daisy-chained large-screen displays are
added, a virtual device called a Daisy Chain
Host is created in the device tree with the
icon. All of the actual daisy chained displays are
branches from this device with the icon .
The Daisy Chain Host device is a placeholder
for the connectivity information for the entire
daisy chain, as follows:
• IP Address or Hostname of the LAN
connection on the rst display on
the daisy chain
• Lowest Monitor ID in the daisy
chain
• Total number of displays in the
daisy chain
The Monitor IDs for each display will be included
in parenthesis in the device names.