Filter
Top Products
116 | NAVISET ADMINISTRATOR 2 USER’S GUIDE
Chapter
10
Usage examples
This chapter gives some step-by-step examples for conguring and running typical Tasks and Reports.
Example Task: Turn displays on and o at set times every weekday
In this example, displays will be congured to turn on and o at set times using two tasks; One to turn display
power on, and another to turn display power o. First a task to turn the display power on at certain times and days
will be created, then duplicated, and then modied to turn o instead of on, and with the power o times.
1. Create a new Task by clicking the New Task toolbar button, or selecting New Task... from the Tasks
menu.
2. Enter a Name and Description for the task to indicate the purpose of the task - in this case powering on
displays.
3. Select the Task Type: Command
4. On the Devices tab, select the devices to be controlled.
5. On the Commands tab, open the Power section on the Controls list, and select Power State to add it to
the list of commands.
6. In the list of commands, select the Power State: On.
7. On the Task Schedule tab, select Start Options: Scheduled.