Open as PDF
When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in a electrical system
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
If you will not be using your vehicle for more than 21
days, you may want to take steps to preserve your
battery. You may:
Disengage the mini-fuse in the Power Distribution
Center labeled IOD (Ignition Off-Draw).
Or, disconnect the negative cable from the battery.
MAINTAINING YOUR VEHICLE 423