Filter
Top Products
Rev 1
C-2
NO INTRCEPT - (No Intercept) Appears when an
attempt is made to recalculate the intercept point on a
DME arc and the actual track does not intercept with the
arc. Change the track (heading) of the aircraft so that
the actual track does intercept the DME arc and try
again.
NO NDB WPTS - (No NDB Waypoints) Appears when
the NDB type pages have been selected if the KLN 90B
doesn’t contain a data base cartridge and there are no
user-defined NDB waypoints.
NO SUCH WPT - (No Such Waypoint) Appears when
there is no waypoint in the data base corresponding to
the entered identifier on the Reference Waypoint page.
NO SUP WPTS - (No Supplemental Waypoints)
Appears when the SUP type pages have been selected
if the KLN 90B doesn’t contain a data base cartridge
and there are no user-defined supplemental waypoints.
NO VOR WPTS - (No VOR Waypoints) Appears when
the VOR type pages have been selected if the KLN 90B
doesn’t contain a data base cartridge and there are no
user-defined VOR waypoints.
OUTDATED DB - (Outdated Database) Appears
whenever the pilot attempts to select an approach from
the database when the database has expired.
RMKS FULL - (Remarks Full) Appears when an
attempt is made to create a user-entered airport remark
on the APT 5 page if 100 user-entered airport remarks
already exist. In order to create additional airport
remarks, some existing remarks must be deleted on the
OTH 4 page as described in section 3.11.6.
RWY MISSING - (Runway Missing) Appears when the
Airport 3 (APT 3) page runway diagram shows some,
but not all, of the runways at the selected airport. This
occurs if the data base contains runway threshold posi-
tion data for only some of the runways at the selected
airport.
USED IN FPL - (Used In Flight Plan) Appears when
you try to delete a user-defined waypoint on the OTH 3
page if the waypoint is used in a flight plan. Either this
waypoint must be deleted from the flight plan or the
entire flight plan must be deleted before this waypoint
can be deleted from the user-defined waypoint list.
USR DB FULL - (User Data Base Full) Appears when
you attempt to create a user-defined waypoint if the user
data base already contains 250 waypoints. In order to
create additional user-defined waypoints, it will first be
necessary to delete existing user-defined waypoints on
the OTH 3 page.