Filter
Top Products
Page 124
Programming Features
Appendix C
6. Select another channel to configure or press the RETURN soft key to back
up one step or press the
MAIN MENU function key to return to the Main
Menu.
Diagnostics
From the Main Menu, select OPTIONS > ADVANCED OPTIONS > DIAGNOSTICS.
In addition to the automatic diagnostics that are performed upon power up,
the following manual diagnostics are available:
• Keypad Test
• LCD Test
• Demonstration Graph
• Velocity Analysis (only meters with area-velocity capability)
• Events (log)
Keypad Test
Keypad Test provides a simple means of verifying the operation of all front
panel keys. Selecting
KEYPAD TEST from the diagnostics menu will bring up
the following screen:
Pressing any key on the front panel (except for the upper left soft key) will
cause that key label to appear in the center of the display.
All numeric keypad keys, soft keys, and function keys may be tested in this
manner.
To end, press the
QUIT soft key (this also verifies the upper left
soft key operation).
Table 30 Setup Parameters for Specific Channels
Channel Name Configuration Options
Process Temperature
1. Select Logged or Not Logged using the
CHANGE CHOICE soft key.
2. Press the ACCEPT soft key to continue.
3. Enter the Logging Interval using the numeric keypad.
4. Select Temperature Units, °F or °C (this is the only place in the
software where temperature units can be changed)
Rainfall Section 4.5.1 on page 74
pH/mV Section 4.9.1 on page 77
Level / Flow Flow Units on page 60 and Level Units on page 61
Analog Inputs Section 4.2.1 on page 70
11:00 AM 21 - APR - 01 KEYPAD TEST
QUIT
KEY PRESSED:
5
PRESS ANY KEY