Filter
Top Products
Page 117
Programming Features
Appendix C Programming Features
Review All Items
To view programmed entries without accidently changing any of the
information, select the Review All Items from the SETUP menu. This
information fills more than one screen, scroll through the setup information
one page at a time with the arrow keys. Press the MAIN MENU key to exit.
.
Displaying Data
The Display Data function provides the recorded data for any channel being
logged in a tabular report or a graph.
In addition, for tabular reports, the data can be viewed from the beginning,
from the end, or from a specific point in time. A graph can display any 24-hour
period, zoom in to any portion of the 24-hour period for finer detail, or center
the graph on a specific point in time.
Selecting the Channel
Note: Only the channels for
which logging has been enabled
will be listed.
1. Press DISPLAY DATA from the Main Menu to display a list of logged
channels.
2. Highlight the desired channel using the up and down arrow soft keys then
press the
SELECT soft key.
11:00 AM 21 - APR - 01 STATUS SCREEN
REVISION: 1.00
FLUME TYPE: PALMER BOWLUS FLUME
FLUME SIZE: 12 in.
SAMPLER PACING:
FLOW UNITS:
LEVEL:
mgd
gal
in.
11:00 AM 21 - APR - 01 STATUS SCREEN
CHANNEL 3 ppm NOT LOGGED 1 min
CHANNEL 4 ppm NOT LOGGED 1 min
CHANNEL 5 ppm NOT LOGGED 1 min
CHANNEL 6
CHANNEL 7
ppm
ppm
NOT LOGGED
NOT LOGGED
1 min
1 min
MEMORY MODE WRAP
11:00 AM 21 - APR - 01 DISPLAY DATA
SELECT
FLOW
RAINFALL
RETURN
PH