Filter
Top Products
Page 120
Programming Features
Appendix C
The Options menu can set the:
• Time and Date for the real time clock in the 980 Flow Meter.
• Program the advanced features of the flow meter.
• Select level sensor when multiple sensors are installed.
Setting the Time and Date
From the Main Menu, select OPTIONS > TIME/DATE.
Starting with the hours and minutes, use the numeric keypad to enter
numbers in the flashing cursor. Use the
+/- keys to toggle between 12-hour
and 24-hour formats. Use the soft keys on the right of the display to toggle the
AM/PM and month fields to the desired selection. Press the
CLEAR ENTRY
key to clear all numeric fields. When complete, press the
ACCEPT soft key to
save the changes.
Advanced Options
1. From the Main Menu, select OPTIONS > ADVANCED OPTIONS.
2. Use the up and down arrow soft keys to highlight the choice, then press
the
SELECT soft key to pick that item.
3. Proceed through the series of screens to configure the parameters for the
selected item.
11:00 AM 21 - APR - 01 TIME / DATE
ACCEPT
CHANGE
AM / PM
_ _: _ _ AM _ _ -APR- _ _
CLEAR
ENTRY
MODE: 12-HR FORMAT
CHANGE
MONTH
USE +/- KEY TO CHANGE 12/24 HR FORMAT
11:00 AM 21 - APR - 01 ADVANCED OPTIONS
SELECT
4–20 mA OUTPUTS
ALARMS
CALIBRATION
COMMUNICATIONS SETUP
RETURN
DATALOG
DIAGNOSTICS
FLOW TOTALIZER