Raymarine C Series GPS Receiver User Manual


 
Chapter 12: System setup and customizing 187
Alarm Setup Menu
The Alarm Setup Menu is divided into these sub-menus:
System Alarms Setup.
Navigation Alarms Setup.
Radar Alarms Setup.
Fishfinder Alarms Setup.
•AIS Alarms Setup.
Note: To silence any alarms, press
ACKNOWLEDGE.
System Alarms Setup
System alarms will sound in all applications.
MENU ITEM OPTIONS
(Default in bold)
Anchor Alarm
Switches the anchor alarm on or off.
OFF
ON
Anchor Alarm Radius
If the
Anchor Alarm
is set to ON, an alarm is triggered when you
drift from your anchor position by more than the specified dis-
tance.
0.01 - 9.99 nm
0.10nm
(or equivalent in the selected
Distance Unit
)
Timer
Switches the countdown timer alarm on or off
OFF
ON
Timer Period
If the
Timer
is set to ON, the system counts down from the time you
specify. An alarm is triggered when zero is reached.
00h01m - 99hrs 59mins
00h00m
Alarm Clock
Switches the alarm clock on or off.
OFF
ON
Alarm Clock Time
If the
Alarm Clock
is set to ON, an alarm is triggered when the time
you specify is reached.
00.01 - 24:00hrs
00:00
Temperature Alarm
If this alarm is set to ON, an alarm is triggered if the temperature
moves into or out of the range that you have specified in
Lower
Temperature Limit
/
Upper Temperature Limit.
OFF
ON
Lower Temperature Limit
Specifies the lower limit of the temperature range that is to trigger
the
Temperature Alarm
.
60°F
0°-99.8°F
Upper Temperature Limit
Specifies the upper limit of the temperature range that is to trigger
the
Temperature Alarm.
75°F
0.2°-99.9°F
81221_4.book Page 187 Tuesday, February 28, 2006 5:24 PM