Raymarine C Series GPS Receiver User Manual


 
Chapter 7: Using the data application 153
To select a pre-configured data panel:
Customize the panels
You can customize each panel by changing:
The panel name.
The size and number of data cells
The data contained in each cell. This data can include any transducer or internally
calculated navigation data that is available on NMEA or SeaTalk. Additional data
includes a compass rose, a distance log and four resettable trip counters.
How the data is displayed. You can control whether the data is displayed in numer-
ical, digits, gauge or graphical format as appropriate to each data item.
Note:
You can also configure the data panels in this way in the Engine Monitoring and
CDI applications.
Renaming a panel
You can customize the names of the panels as required e.g. the SAILING panel could be
renamed RACING:
1. Select and rename the appropriate panel:
2. Save the changes:
D8466_1
ACTIVE
Move control
to Digital Data
window
Select required
panel type
Selected panel type
displayed
e.g.
Select page including
Digital Data application
WAYPOINT
D8732_1
RENAME PANEL...SAILING
Press and hold soft key
of panel for renaming
e.g.
e.g.
,
To rename the panel use:
and/or
Rename Instrument panel
Soft key
Panel name
Raci
D8733_1
OK OK
e.g.
To return to
panel soft keys
Soft key changes to reflect renamed panel
NAVIGATION WAYPOINT ROUTE FISHING Racing
81221_4.book Page 153 Tuesday, February 28, 2006 5:24 PM