Filter
Top Products
Chapter 12: System setup and customizing 189
Note: If a fishfinder is not detected, the alarm setup windows are greyed out.
AIS Alarms Setup
GPS Status
The GPS is used to position your boat on the chart. You can set up your Global
Positioning System (GPS) and check its status using the GPS status icons and the GPS
Status page of the Setup menu.
To access the GPS Status page:
Deep Fish Limit
Specifies the upper value for the
Fish Alarm Depth LImit
1000ft
(0002ft - 5000ft)
Shallow Depth Alarm
Switches the shallow depth alarm on or off.
If a DSM is not connected, this cannot be set.
OFF
ON
Shallow Depth Alarm Value
If the
Shallow Depth Alarm
is set to ON, an alarm is trig-
gered if the depth drops below the value you specify.
5ft
(0002ft - maximum range of
transducer)
Deep Depth Alarm
Switches the deep depth alarm on or off.
If a DSM is not connected, this cannot be set.
OFF
ON
Deep Depth Alarm Value
If the
Deep Depth Alarm
is set to ON, an alarm is triggered if
the depth exceeds the value that you specify.
3000 ft
(DSM with 600W
transducer attached)
5000 ft (DSM with 1kW
transducer attached)
Dangerous Targets Alarm
Switches the alarm for dangerous targets to on or off. When
OFF, the AIS alarm off icon is displayed in the status bar.
OFF
ON
AIS Alarm List
Details the identity, description, time and acknowledge-
ment of alarm messages received from an AIS receiver.
See “AIS Alarms” on
page 174.
MENU ITEM OPTION
(Default in bold)
Setup
System Setup...
Alarm Setup
GPS Setup....
Compass Setup...
Display setup...
Highlight GPS Setup
Select GPS Setup
D8710_1
MENU
0
0
0
0
0
0
0
0
0
0
0
00001.0
SD-FIX
1.0
SATELLITE DIFFERENTIAL
WGS 1984
81221_4.book Page 189 Tuesday, February 28, 2006 5:24 PM