Filter
Top Products
54 C-Series Display Reference Manual
Displaying vessel identity (AIS)
If you have an AIS receiver fitted to your system, you can use the AIS feature to:
• Display targets for any other AIS equipped vessels.
• Display voyage information being broadcasted by these targets i.e. their position,
course, speed and rate of turn.
• Display basic or detailed information for each target vessel including safety critical
target data.
• Set up a safe zone around your boat.
• View AIS alarm and safety related messages.
This information is displayed in the form of an overlay and additional data is displayed
in a dialog box on your chart screen e.g.
To switch on AIS:
This feature can also be used in conjunction with the radar application. For full
information on how to use the AIS feature, please refer to
Chapter 11:Automatic
Identification System (AIS)
.
D9056_1
097°T
11.6kt
1.237nm
00h04m33s
Safety
critical data
Heading
Large
vessel
Direction
of turn
Small
vessel
COG/SOG
vector
Safe zone (defined by
distance or time)
Dangerous
target (flashes)
Sleeping
target
D9023_1
CHART LAYERS...
AIS LAYER
PRESENTATION
ON
81221_4.book Page 54 Tuesday, February 28, 2006 5:24 PM