Filter
Top Products
36 C-Series Display Reference Manual
CAUTION:
It is possible to move waypoints that are used in routes. In such instances, the
stored route will include the Waypoint in its new position. Ensure that this
does not present a navigation hazard.
Erasing a waypoint(s)
You can erase any waypoint on the system (including groups of waypoints) except:
• The active waypoint or
• Any waypoint used in a route.
Notes: (1)
If a route is hidden its waypoints can still be displayed. If you attempt to
erase a waypoint from a hidden route, a warning message will be dis-
played.
(2)
For details of erasing groups of waypoints, see page 41.
Erasing an individual waypoint
You can erase individual waypoints on screen or via the waypoint list.
...using the cursor
... using the waypoint list
1. Select the waypoint for erasing from the waypoint list:
2. Erase the selected waypoint:
D8289-2
WPT
ERASE WAYPOINT
YES
Select waypoint
for erasing
Confirm the pop-up
message
REVIEW AND EDIT
WAYPOINTS...
Select waypoint
for erasing
WPTS
MOB
Waypoint List
D8843_1
D8844_)
YES
ERASE WAYPOINT
OK
81221_4.book Page 36 Tuesday, February 28, 2006 5:24 PM