Filter
Top Products
184 C-Series Display Reference Manual
Simulator
ON - allows operation of display without data from antenna
and/or external data sources.
Demo - a series of slides with descriptions to demonstrate the
various system functions.
OFF
ON
Demo
Bearing Mode
Mode of all bearing and heading data displayed. This does not
affect how the chart or radar are drawn.
True
Magnetic
MOB Data Type
Selects whether position data or dead reckoning displayed on
screen. Assuming your boat and the MOB are subject to same
tide and wind effects, dead reckoning normally gives a more
accurate course.
Dead Reckoning
Position
Variation Source
This allows you to compensate for the naturally occurring off-
set of the earths magnetic field. When set to AUTO, the value
the system would use (or is using) is noted in the menu e.g.
4
0
W. To enter your own variation value, set to MANUAL.
Auto
Manual
Manual variation
If Variation Source is set to MANUAL then use this setting to
enter the variation value. This value is transmitted to any other
SeaTalk instruments.
0°E
Range 0 - 30º east/west
Language
Selected language used for screen text, labels, menus, options
and display format for lat/lon position information.
Selection available will
vary according to your
location.
Extended Character Set
Controls whether additional accented characters are made
available when you are entering text.
OFF
ON
Ground Trip Reset...
Resets the chosen ground trip distance counter to zero. Ground Trip 1 - 4 Reset
Settings Reset
Resets all system setup menus, including page sets and the data bar to the factory default.
Waypoints, routes and tracks are NOT removed.
Settings and Data Reset
Resets all system setup menus, including page sets and the data bar to the factory default.
Waypoints, routes and tracks are deleted.
Date /Time Setup
See sub-menu below
Units Setup
See sub-menu below
MENU ITEM OPTIONS
(Default in bold)
81221_4.book Page 184 Tuesday, February 28, 2006 5:24 PM