Raymarine C Series GPS Receiver User Manual


 
Chapter 10: Navtex 163
Chapter 10: Navtex
10.1 Overview
The display can be used to view marine safety information including weather forecasts
and marine warnings received from a Navtex receiver. You can select the type of
warning message that will trigger this alert on your display. Once you have read the
received message you can either erase or save it. Your system can store up to 100
messages. Once capacity is reached the oldest messages are automatically deleted to
allow for new incoming messages.
Major areas of NAVTEX coverage include the Mediterranean Sea, The North Sea,
coastal areas around Japan and areas around the North American continent.
10.2 Setting up Navtex weather
Before you are able to view Navtex messages you will need to:
1. Specify for the communicating NMEA port, the baud rate (4,800 or 9,600) applica-
ble to your Navtex receiver (see
page 186
).
2. Enable the category of Navtex messages that you wish to receive alerts for (see
page 164
).
10.3 Incoming message alerts
Once correctly connected to the Navtex unit, your system will display an alert
containing the message details for any incoming messages it receives from your
chosen categories e.g:
Proceed as follows:
To remove the alert from the screen, press ERASE, or
To add the message to the stored list of messages and then remove the alert from
the screen, press SAVE MESSAGE.
D8870_1
ERASE MESSAGE SAVE MESSAGE
81221_4.book Page 163 Tuesday, February 28, 2006 5:24 PM