Filter
Top Products
188 C-Series Display Reference Manual
Navigation Alarms Setup
Navigation alarms will sound in any application when you are navigating.
Radar Alarms Setup
These alarms will only sound when you are in the radar application.
Note: If a radar is not detected, the alarm setup windows are greyed out.
Fishfinder Alarms Setup
MENU ITEM OPTIONS
(Default in bold)
Arrival Alarm Radius
The distance from the target waypoint or the closest point of
approach to the target waypoint that triggers the arrival
alarm to sound.
0.1nm
0.01 - 9.99nm
Offtrack Alarm
Switches the off-track alarm on or off
OFF
ON
Offtrack Alarm XTE
If the
Offtrack Alarm
is set to ON, an alarm is triggered when
the XTE for any current navigation, exceeds the value that
you have specified.
0.3nm
0.01 - 9.99nm
(or equivalent in the
selected
Distance Unit
)
MENU ITEM OPTIONS
(Default in bold)
Guard Zone Sensitivity
Ensure that this is not set too low or targets will be missed.
50%
0 - 100%
MENU ITEM OPTION
(Default in bold)
Fish Alarm
Switches the fish alarm on or off.
OFF
ON
Fish Alarm Sensitivity
If the
Fish Alarm
is set to ON, an alarm is triggered when the
fish return strength reaches the sensitivity that you specify.
5%
10% - 100%
Fish Alarm Depth Limits
If the
Fish Alarm
and this alarm is set to ON, an alarm is trig-
gered (2 beeps) if any target meets the sensitivity level and
is within the
Shallow Fish Limit
and
Deep Fish Limit
that you
specify.
OFF
ON
Shallow Fish Limit
Specifies the lower value for the
Fish Alarm Depth LImit
.
2ft
(0002ft - 1000ft)
81221_4.book Page 188 Tuesday, February 28, 2006 5:24 PM