Raymarine C Series GPS Receiver User Manual


 
Chapter 9: Using the Engine Monitor 159
Chapter 9: Using the Engine Monitor
9.1 Introduction
The engine monitor application enables you to view information in the form of gauges
and digital data, from up to three compatible engines. To provide a fast update rate,
the engine data is transferred from the engine’s serial interface to your C-Series display
via NMEA2000/SeaTalk
2
.
Note: For details of compatible engines and related software updates, please re-
fer to the Raymarine website on www.raymarine.com.
If the pre-configured content of these panels and/or the layout of the individual data
boxes is not suitable, you can configure the system to display the data and layout of
your choice - see
page 153
.
9.2 Displaying and setting up the engine monitor
Before using the engine monitor application you should set up your system as follows:
1. Customize a page set to include an engine monitor application window. For details
of how to select a particular window and application, please refer to
page 177
.
2. Set the number of engines and the maximum tachometer range to reflect your par-
ticular vessel:
00
25 25
50 50
75 75
100 100
%%
Fuel 1 Fuel 2
Fuel Rate
11.61
gals/h
Fuel Rate
13.95
gals/h
D7516_3
ENGINE
ENGINE &
FUEL
ENGINE &
RESOURCES
TWIN ENGINE
FUEL
R
ESOURCES
81221_4.book Page 159 Tuesday, February 28, 2006 5:24 PM