Filter
Top Products
186 C-Series Display Reference Manual
System Integration Setup Menu
Pressure Units
Select required pressure unit.
Bar
Psi
Kpa
Volume Units
Select required volume unit.
US Gallons
Imp Gallons
Litres
MENU ITEM OPTIONS
(Default in bold)
DSC Message
When set to ON, details of distress DSC messages are dis-
played on screen
ON
OFF
SeaTalk Alarms
When set to enabled, all SeaTalk system alarms are received
and displayed on the chartplotter.
Enabled
Disabled
Data Master
When set to ON, the display you are working on is defined as
the master.
ON
OFF
Bridge NMEA Heading
Used to prevent NMEA heading data being bridged onto the
SeaTalk bus. Switch this function off if you are using MARPA
with an external fast heading sensor.
ON
OFF
NMEA Output Setup
Allows you to switch off individual NMEA out sentences
APB, BWC, BWR, DBT, DPT,
GGA, GLL, MTW, RMA,
RMB, RMC, RSD, RTE, TTM,
VHW, VLW, VTG, WPL, ZDA
NMEA Port Setting
Select the appropriate setting dependent on the equipment
attached to the NMEA port for each individual display.
When Navtex 4,800 or 9,600 selected, the option to view
the Navtex message list is available.
NMEA 4,800
Navtex 4,800
Navtex 9,600
AIS 38,400
ST290 System
Select ON if your C-Series is connected to a SeaTalk
2
system.
OFF
ON
SeaTalk
2
Keyboard
Used to set up the SeaTalk2 keyboard with your Display.
When you are connecting a keyboard to your system select
ALL or ONE. When ONE selected press button on required
keyboard - display beeps to indicate keyboard selected.
OFF
ALL
ONE
MENU ITEM OPTIONS
(Default in bold)
81221_4.book Page 186 Tuesday, February 28, 2006 5:24 PM