Raymarine C Series GPS Receiver User Manual


 
196 C-Series Display Reference Manual
Installation/Display
Problem
Solution
Display does not power up
Check power supply cable is sound and that all connections are tight and free from corrosion.
•Check relevant fuses.
Check power source is of the correct voltage and sufficient current.
My display switches off
Check power input connection is secure at the rear of the Display(s).
Check power cable for damage or corrosion.
Check your boat’s power supply for faulty connections or insufficient cable diameter.
How do I upgrade my Display software?
Visit www.raymarine.com and click on Support to download the latest software. Follow the instruc-
tions included with these downloads.
How do I reset my display?
Via the system setup menu. For details see page
page 194
.
Display very dull/hard to view
Check PALETTE set to DAY (see
page 16
).
Check backlight level (see
page 16
).
No fix displayed against GPS status icon
•Check GPS status (see
page 189
).
Check the GPS antenna has a clear view of the sky.
Check connections/operation of the GPS antenna.
No instrument navigational or engine data displayed
Check instruments/engine interface are operating correctly.
Check SeaTalk/NMEA correctly connected to Display (see System Integration chapter of the Instal-
lation Guide).
Check all SeaTalk/NMEA cables are free from damage and corrosion.
81221_4.book Page 196 Tuesday, February 28, 2006 5:24 PM