Raymarine C Series GPS Receiver User Manual


 
134 C-Series Display Reference Manual
Wakes
When the wakes function is switched on, you can see the direction and speed of
moving targets relative to your boat. A target is displayed in yellow and as the signal
diminishes with time it is shown in paler shades of blue.
Displaying wakes
To switch on the wakes function:
Specifying the wake period
You can select via the Radar Setup Menu, whether these wakes are shown for periods
of 10 seconds, 30, seconds, 1 minute, 5 minutes or 10 minutes.
To specify the wake period:
Note:
You can also enter the Radar Setup Menu by pressing and holding the WAKES
soft key.
Removing wakes
When the currently displayed wakes are no longer required they can be remove from
your screen:
ENHANCE
ECHOES...
WAKES
D8421_1
O
N
Toggle to ON
Radar Setup Menu
Interference Reject NORMAL
Target Expansion LOW
Wakes Period 1 min
OK
D8422_1
Select Wakes Period
Select wakes period
Highlight Wakes Period
MENU
Highlight Radar
Setup
Select Radar Setup
Setup
Radar Setup...
GPS Status...
Compass Setup...
System Setup...
ENHANCE
ECHOES...
D8423_1
CLEAR WAKES
81221_4.book Page 134 Tuesday, February 28, 2006 5:24 PM