Filter
Top Products
MAINTENANCE
2.32
TIRE INSPECTION
G Improper tire inflation may affect ATV
maneuverability.
G When replacing a tire always use
original equipment size and type.
G The use of non-standard size or type
tires may affect ATV handling.
Tire Tread Depth
Always replace tires when tread depth is worn to
1/8″ (3 mm) or less.
Tread
Depth 1/8I (3 mm)
WARNING
Operating an ATV with worn tires will increase
the possibility of the vehicle skidding and pos-
sible loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth
measures 1/8″ (.3 cm) or less.
FRAME, NUTS, BOLTS,
F
ASTENERS
Periodically inspect the torque of all fasteners in
accordance with the maintenance schedule. Check
that all cotter pins are in place. Refer to specific
fastener torques listed in each chapter.
FRONT / REAR STORAGE
COMP
ARTMENTS
The front and rear storage compartments are easily
accessible. To open the front compartment turn the
latch handle to the horizontal position on both sides.
To close the storage compartment turn the latch
handles to the vertical position.
Front Storage -- Unlatched
Front Storage -- Latched
Rear Storage -- Latched