Filter
Top Products
BODY / STEERING / SUSPENSION
5.4
FRONT COVER REMOVAL /
INSTALLA
TION
1. Open the front storage compartment.
2. Pull up and outward on the front cover to remove
the cover.
3. To install the front cover, insert the tabsof thefront
cover into the inserts of the cab. Make sure the
tabs are aligned with the slots. Then press the
rear tabs into the slots.
FOOT WELL REMOVAL /
INSTALLA
TION
1. Remove the four plastic inserts (A) that secure
the wheel well to the front and rear cabs. (See
“PLASTIC INSERT REMOVAL /
INSTALLATION” for help).
2. Remove the four screws (B) from the bottom of
the foot well. Remove the footwell.
A
A
B
18 in.lbs.
(2 Nm)
3. Reverse the removal procedures to install the foot
well. Be sure to properly align the the cab ends
into the foot wells upon reassembly.