Filter
Top Products
FINAL DRIVE
7.29
5. Apply Crankcase Sealant (PN 2871557)to
surface of case and install cover bolts. Install the
gearcase cover onto the gearcase housing.
Torque the cover bolts to 25 ft. lbs. in a criss cross
pattern.
Gearcase Cover Bolt Torque:
25 ft. lbs. (34 Nm)
6. Install the drain plug and fill plug. Replace the
drain plug washers to ensure proper sealing after
filling.
Fill Plug
Drain Plug
14--18 ft.lbs.
(19--24 Nm)
REAR GEARCASE
INSTALLA
TION
1. To install the rear gearcase, reverse the removal
procedures.
2. Torque the installation bolts and nuts to the
torques specified.
3. Refill the rear gearcase with 5 oz. (150 ml) of
Polaris Premium Gearcase Lubricant (PN
2871653). Torque the fill plug to 14--18 ft. lbs.
(19--24 Nm).
Fill / Check