Filter
Top Products
MAINTENANCE
2.9
LUBRICATION
* More often under severe use, such as operated in water or under severe loads.
¡ Semi-annually or 50 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
© Annually or 100 hours of operation (refer to Maintenance Schedule for additional information)
More often under severe conditions (operating in water or hauling heavy loads)
¢ Grease conforming to NLGI No. 2, such as Polaris Premium All Season Grease, Conoco Superlube M or
Mobilegrease Special
Ill.
#
Item Lube Rec. Method Frequency*
1. Engine Oil Polaris 0W--40
Synthetic
Check dipstick and add to
proper level.
Change after 1st month, 6 months or 100
hours thereafter; Change more often
(25-50 hours) in extremely dirty condi-
tions, or short trip cold weather operation.
2. Transmis-
sion
Polaris AGL Gear-
case Lubricant
Add lube to bottom of fill hole. Change annually ©
3. Front Gear
Case
Premium Demand
Drive Hub Fluid
Drain completely. Add lube to spe-
cified quantity.
Change annually ©
4. Rear Gear
Case
ATV Angle Drive
Fluid
Drain completely. Add lube to spe-
cified quantity.
Change annually ©
5. Brake Fluid Polaris Dot 3 Brake
Fluid
Fill master cylinder reservoir to in-
dicated level inside reservoir.
As required. Change fluid every 2 years
2. Transmission
1. Engine Oil
5. Brake Fluid (Left hand Master Cylinder)
3. Front Gear Case Fill Plug
Fill Plug
4. Rear Gear Case Fill Plug
Master Cylinder
Reservoir
Dipstick/Fill Tube
Fill / Check
Drain Plug
Drain Plug
Fill / Check
Drain Plug
0W/40
AGL
DHF
ADF