Filter
Top Products
5-6
Garmin GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. B
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
5.5 Direct-To Map Waypoint
A Direct-To course may be set to any waypoint selected on the Map page. The
waypoint is selected by touching an item such as an airport, VOR, or NDB or
any other location. Touching the map page at any place not having an existing
location name will create a waypoint with the name “MAPWPT.” Touching the
Direct-To key will automatically insert the selected waypoint as the Direct-To
waypoint. The MAPWPT will be saved as a User Waypoint.
1. On the Map page, touch the map at the location intended to
be the Direct-To waypoint.
2. Press the Direct-To key on the right side of the unit.
Touch To
Remove The
Direct-To Course
Direct-To Waypoint Name
Waypoint Tab
Touch To
Activate The
Direct-To Course
Direct-To Waypoint
Map Symbol
Figure 5-9 Touch the Map to Create a MAPWPT as the Direct-To Course Destination
3. Touch the Activate key or press the small right knob to
activate the selection.