Filter
Top Products
15-15190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.4.2 CDI Selection
The CDI source and ILS CDI Capture type may be selected manually or
automatically. The selected CDI Scale will be reflected in the annunciation bar at
the bottom of the display.
1. While viewing the System Setup page, touch the CDI key
.
Touch To Choose Auto or
Manual CDI Scale Selection
Touch To Select ILS CDI
Capture Type
Figure 15-17 CDI Selection
2. Touch the CDI Scale key
to toggle between automatic selection
or to choose the CDI scale manually.
Touch To Select CDI Scale
Figure 15-18 CDI Scale Selection
3. Touch the ILS CDI Capture key to select Auto Switch or Manual
Selection. This feature enables the unit to automatically switch from
GPS to VLOC on an ILS approach. See
Procedures-ILS Approaches
for more detail on ILS approaches.