Filter
Top Products
7-17190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
3. Touch the desired hemisphere keys to select the desired values.
After selecting the hemisphere value, the cursor will advance to
the first character of the adjacent numeric value for selection.
Even when the hemisphere values are highlighted, touching
a valid numeric key will always place the cursor at the first
numeric value. The Large knob may also be used for cursor
movement and characters are selected with the Small knob.
NOTE: When editing values, turn the Large knob counter-clockwise to
backspace or move the cursor to the left.
4. As each value is selected, the cursor will advance to the next
character. Touch the necessary key for the desired values.
5. When finished with the Lat/Lon selections, touch the Enter
key.
6. When finished with all selections, touch the Back and then
the Create key to create the new waypoint.
7.7.2
Waypoint Location Based on Two Radials
1. From the Create User Waypoint page, touch the Position key
and then the Radial/Radial key.
Touch to Select
Radial/Radial Waypoint
Reference Type
Touch to Select
Radial Values
Touch to Select
Reference Wpts
Figure 7-24 Waypoint Info - Create User Waypoint Type - Radial/Radial
2. Touch a Ref Wpt key and use the alphanumeric keypad to
select the desired identifier.
3. Touch the upper Radial key and use the numeric keypad to
select the desired value.
4. Touch the Enter key.
5. When finished with all selections, touch the Create key to
create the new waypoint.