Filter
Top Products
9-4
Garmin GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. B
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
9.1.3 Displaying Traffic on the Traffic Page
1. From the Home page, touch the Traffic key.
2. Confirm TIS is in Operating Mode.
3. Touch the Traffic Status key to toggle between Operate and
Standby mode.
9.1.4 Altitude Display
1. While viewing the Traffic page, touch the Operate key to begin
displaying traffic. “Operate” is displayed in the Traffic Status
field.
2. Touch the Altitude Filter key to change the altitude volume.
Select
the desired altitude volume by touching the
BELOW,
NORMAL, ABOVE, or UNRESTRICTED keys. The selection
is displayed in the Altitude mode field.
Selected
Altitude Filter
Slider Indicates
More Selections
Are Available
Figure 9-4 Traffic Altitude Filter Page
Altitude Mode Displayed Traffic Range
Below -9900 ft to 2700 ft
Normal -2700 ft to 2700 ft
Above -2700 ft to 9900 ft
Unrestricted All Traffic Shown
Table 9-2 Displayed Traffic Range