Filter
Top Products
6-9190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
NOTE: As an alternate means of loading an approach, the
Channel ID key allows you to select the channel ID for a SBAS
approach for the current destination. The channel ID for the
SBAS approach is available from an approved approach chart.
If duplicate numbers are available for a channel, a list will be available
where you may select the desired approach.
7. Touch the Load Approach key. The Active Flight Plan page
will be displayed. The approach waypoints are placed at the
end of the flight plan and the unit will automatically sequence
to them after the en route waypoints.
8. Touch the Activate Approach key, which makes the active
leg Direct-To the IAF, or for Vector approaches to activate a
leg that is an extended final approach course. You can also
"activate" the selected procedure on the Procedures page, if
the approach is not activated on this page.
9. Touch the Preview key.
Sequence List
For The Selected
Transition
Approach
Diagram
Touch To Load
Approach
Figure 6-20 Selected Approach Preview