Filter
Top Products
14-9190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
14.2 Flight Timers
The Flight Timers function provides count up/down timers, plus automatic
recording of departure time, and total trip time. Departure and total trip time
recording can be configured to run either any time unit power is on, or only when
your ground speed exceeds the in-air threshold set by the installer (for example,
30 knots). A flexible Generic Timer is available for general timing needs.
NOTE: When a count up timer is used, the preset value has no function.
1. While viewing the Utilities page, touch the Flight Timers
key.
2. If the Generic Timer Direction counter is set to "Up," the Reset
Timer key will be shown and when touched will return the
timer to 00:00:00. If the Direction counter is set to "Down,"
the Preset Timer key will be shown and the key will return the
timer to the Preset time value.
Selected
Counter
Direction
Start/Stop Generic Timer
Reset or
Preset Timer
Select Preset
Time
Elapsed
Time
Touch To
Toggle Timers
Figure 14-11 Utility Flight Timers Page (Generic Timer)
3. Touch the Trip/DEP Timers or Generic Timer keys to toggle
between the timer types.
Departure Time
(Local Time)
Elapsed
Time
Set Departure Time
To Current Local
Time Of Timer Start
Select
Criteria For
Timer Start
Reset Timer
Touch To
Toggle Timers
Figure 14-12 Utility Flight Timers Page (Trip/DEP Timers)
4. Touch each key as desired to set up timer operation.