Garmin gtn 625 GPS Receiver User Manual


 
15-19190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.4.6 Crossfill
Dual units may be interfaced to crossfill information between the two units.
This option will not be available unless dual units are configured.
When Crossfill is turned on with one GTN, it is automatically turned on in the
other GTN. Some items are always crossfilled regardless of the crossfill setting;
others are dependent on the crossfill setting.
NOTE: Upon crossfill being activated, the GTNs may take up to 10 seconds
to crossfill the flight plans. The pilot must verify the flight plan in each unit
prior to use.
This data is always crossfilled:
•Userwaypoints
•Flightplancatalog
•Alerts (trafc popup acknowledgement, missed approach waypoint
popup acknowledgement, altitude leg popup acknowledgement)
•Externalsensors(transponderstatusandcommands,synchroheading)
•Systemsetup:
- Favorite NAV frequencies
- Date/Time convention
- Nearest airport criteria
- Units (Nav angle, Distance/Speed, etc.)
- Favorite COM frequencies
- Ownship icon
- CDI Scale setting
- ILS CDI Capture setting
This data is crossfilled only if crossfill is turned on by the pilot:
•Activenavigation(ightplan)