Filter
Top Products
7-16
Garmin GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. B
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
Touch to Select the
Desired Waypoint
Reference Type
Figure 7-21 Waypoint Info - Create User Waypoint Type
6. If desired, touch the Temporary? key to create the waypoint
for only temporary use. Temporary waypoints will be removed
when the power is cycled.
7. When finished with all selections, touch the Create key to
create the new waypoint.
7.7.1 Waypoint Location Based on Lat/Lon
Coordinates
1. From the Create User Waypoint page, touch the Position
key and then the Lat/Lon key. Then, touch the Latitude/
Longitude value key.
Touch to Select
Lat/Lon Waypoint
Reference Type
Touch to Select
Lat/Lon Values
Figure 7-22 Waypoint Info - Create User Waypoint Type - Lat/Lon
2. The Lat/Lon coordinate values will be highlighted. Touch the
Lat or Lon key to toggle selection of the hemisphere values
and highlight the selected value. The Large knob may also be
used for cursor movement and characters selected with the
Small knob. Use the Large knob to backspace or move the
cursor to the left.
Touch to Select
Lat/Lon Coordinates
Touch to Select
Hemisphere Value
Touch To Toggle
Lat/Lon Selection
When The Lat Key Is Touched, The Latitude
Hemisphere Value Is Active For Selection
Figure 7-23 Waypoint Info - Set Lat/Lon Coordinates