Garmin gtn 625 GPS Receiver User Manual


 
16-16
Garmin GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. B
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
Message Description Action
TRAFFIC -
Traffic device is
inoperative or
connection to GTN
is lost.
The GTN is configured
for a traffic device but is
not receiving data from
it. Traffic will not be
displayed on the GTN.
Contact dealer for service.
TRAFFIC -
Traffic device has
been in standby
for more than 60
seconds.
The GTN is airborne
and the traffic device
has been in standby for
more than 60 seconds.
Set the traffic device to “operate”
on the traffic page if traffic alerts
are desired.
TRANSPONDER -
Transponder 1
and 2 Mode S
addresses do not
match.
The GTN is configured
for two transponders
and their Mode S
addresses do not
match. This message
is intended to assist
installers and will not
occur in a properly
configured system.
Contact dealer for service.
TRANSPONDER
1 OR 2
Transponder 1 or 2
needs service.
The transponder is
reporting to the GTN
that it needs service.
The transponder may
continue to function.
Verify squawk code and altitude
with ATC. Contact dealer for
service.
TRANSPONDER
1 OR 2
Transponder 1 or
2 is inoperative or
connection to GTN
is lost.
The GTN is configured
for transponder 1 or
2 but is not able to
communicate with the
transponder.
Verify squawk code and altitude
with ATC. Contact dealer for
service.