Filter
Top Products
14-6
Garmin GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. B
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
14.1.3 Vertical Speed (VS) Profile
This value sets the vertical speed.
1. While viewing the VCALC page, touch the VS Profile key.
Numeric
Keypad
Selected
Vertical
Speed
Backspace
Key
Touch Enter Or
Press Small Knob
To Save Value
Figure 14-7 Select VCALC Vertical Speed
2. Use the numeric keypad to select the desired Vertical Speed
and then touch the Enter key.
14.1.4 Target Offset
The Target Offset is a pilot-selected distance value that represents the
geographical location where you wish to arrive at the target altitude. This
distance is measured from the Target Waypoint and, in a separate data field on
the VCALC page, designated as either before or after the Target Waypoint.
1. While viewing the VCALC page, touch the Offset key.
Numeric
Keypad
Selected
Target
Offset
Backspace
Key
Touch Enter Or
Press Small Knob
To Save Number
Figure 14-8 Select VCALC Target Offset
2. Use the numeric keypad to select the desired Target Offset and
then touch the Enter key.