Filter
Top Products
1-7190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
1.4.2 Database Verification and Fuel Settings
1. When the System and Database Version page appears, check
to ensure databases are current. Then, touch Continue.
Check To
Ensure
Required
Databases Are
Present And
Current
Touch To
Continue To
Home Page
Software and GPS
Engine Versions
Check For Any
Messages
Figure 1-10 System Startup Pages
2. When the Instrument Panel Self-Test and Fuel Setting page
appears, check to ensure that the CDI/HSI outputs and
other displayed data are correct on the external interfaced
equipment.
3. Touch each of the Fuel value keys and set the appropriate
values as desired. Fuel capacity is shown in either gallons or
pounds as set in the Units feature of System mode.
Touch To Set
Current Fuel
Quantity
Start-Up
Instrument
Panel Test
Conditions
Touch To Continue
To Home Page
Touch To Set
Fuel Flow
Figure 1-11 Instrument Panel Self-Test & Fuel Settings Page