Filter
Top Products
6-7190-01004-03 Rev. B
Garmin GTN 625/635/650 Pilot’s Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
Scroll To View
Flight Plan
With Departure
Waypoints
Touch To Edit
Waypoint
Touch To Select
Or Remove
Arrival
Figure 6-14 Flight Plan With Arrival Loaded
6.4 Selecting an Approach
Only one approach can be loaded at a time in a flight plan. If an approach
is loaded when another approach is already in the active flight plan, the new
approach replaces the previous approach. The route is defined by selection of an
approach, the transition waypoint, and a runway.
1. Touch the PROC key on the Home page. The Approach,
Arrival, and Departure fields will be dashed until a selection
is made.
Touch To Select Approach
Touch To Select Arrival
Touch To Select Departure
Figure 6-15 Procedures Selection Window
2. Touch the Approach key on the Procedures page to select
an approach for the destination airport. Confirm that the
intended airport is shown or touch the Airport key and select
the desired airport.
Touch To Select Approach
Touch To Select Airport
Touch To Select Channel ID
Figure 6-16 Selecting an Approach