Filter
Top Products
9-5
Creating the “WWBAY” user waypoint...
Press WPT and the WPT softkey, if
needed, to select the Waypoint
Definition Page.
Press the right arrow key to place the
cursor on the waypoint category field.
Press CLR (repeatedly) until “USR” is
displayed. The Whitewater Bay area
will be added to memory as a user
waypoint.
Press the right arrow key to place the
cursor on the waypoint identifier field.
Enter the waypoint identifier, WWBAY,
using the alphanumeric and arrow
keys. Begin by pressing the “8” key to
select the letter “W”.
Press the “8” key again to select the
second “W”.
Press the “1” key to select the letter
“B”.
WPT
CLR
ABC
1
*Plus WPT softkey, if
needed
*Press repeatedly until
“USR” is displayed
VWX
8
VWX
8