Filter
Top Products
8-14
8.12 INPUT/OUTPUT SETUP (INTERFACES)
From the Input/Output Page, you may
select the input and/or output format
needed to connect your GPS 95 to
other equipment: PC, NMEA device,
etc. You may select no input/output
(NONE/NONE), GARMIN input/output
(GARMIN/GARMIN), NMEA output
(NONE/NMEA), RTCM input/NMEA
output (RTCM/NMEA) or RTCM input
(RTCM/NONE).
When the NMEA output is selected a second cyclic field appears. From this
second field you may select the desired NMEA format: NMEA 0180, NMEA
0182, NMEA 0183 Version 1.5 or NMEA 0183 Version 2.0.
To select a NMEA output...
· Place the cursor on the input/output format field.
· Press CLR until the desired NMEA output option (NONE/NMEA or
RTCM/NMEA) is displayed.
· Press the right arrow key.
· Select the desired NMEA format by pressing CLR.
A second cyclic field also appears
when the GARMIN input/output is
selected. The GARMIN option allows
you to exchange data such as
waypoints, routes, track logs and
satellite almanac data with another
GPS 95 or with a PC-compatible
computer. You may select between
acting as a HOST to data exchanges (HOST), requesting data (REQUEST)
or sending data (SEND). During the data transfer process the number of data
packets being exchanged will be displayed.