Filter
Top Products
6-6
The waypoint list displays route waypoints starting with the “active to”
waypoint. For each waypoint, additional information is available. The first
column displays Distance (DIS). The second column is a cyclic field that
displays Estimated Time Enroute (ETE, in hours/minutes or minutes/seconds,
as appropriate), Estimated Time of Arrival (ETA), or Desired Track (DTK).
You may scroll through the waypoint list with the arrow keys.
To edit the active route...
· To insert a waypoint: highlight the waypoint you want to place the new
waypoint in front of, type in the new waypoint name and press ENT.
The new waypoint is added to the route.
· To delete a waypoint: highlight the waypoint you wish to delete, press
CLR and ENT.
6.7 ROUTE LIST
The Route List Page displays a list of all routes currently stored in memory.
Press the LIST softkey to select this page. The Route List Page displays the
route numbers (far left), beginning waypoint, and final destination waypoint.
You may also activate or delete a route from the Route List Page.
To Activate a Route...
· Highlight the route you wish to activate with the arrow keys.
· Press ENT. The Route Definition Page is displayed with the “Activate?”
action highlighted.
· Press ENT to activate the route.
To Delete a Route...
· Highlight the route you wish to delete using the arrow keys. Press
CLR. The Route Definition Page is displayed with the “Clear?” action
highlighted.
· Press ENT to delete the route.