Filter
Top Products
5-9
The Operating Mode Page is displayed
showing the current operational mode.
Place the cursor on the operational
mode field using the right arrow key.
Press CLR until “Simulator?” is
selected.
Press ENT to accept simulator mode.
The cursor is now on the reference
waypoint identifier. The intersection,
LENEX, will be entered here using the
alphanumeric keys.
Press the “4” key, followed by the right
arrow key to select the letter “L”.
Press the “2” key to select the letter
“E”.
Continue pressing the desired
alphanumeric keys and, if needed, the
arrow keys to enter the “LENEX”
intersection. Press ENT when
complete.
DEF
2
*Press alphanumeric and
arrow keys, as needed, to
select desired identifier
JKL
4
CLR
*Repeat until desired
mode is selected
ENT