Filter
Top Products
6-5
· To insert a waypoint into the route:
highlight the waypoint you want to
place the new waypoint in front of,
type in the new waypoint name
and press ENT. The new waypoint
is added to the route.
· To delete a waypoint from the
route: highlight the waypoint you
wish to delete, press CLR and
ENT.
· If you attempt to add a waypoint to a route that already contains 30
waypoints, you will be informed with the message, “Route is Full”.
NOTE: You may also edit a route from the Active Route Page. (See Section
6.6.)
6.5 DELETING ROUTES
You may delete an unwanted route from the Route Definition Page.
To delete a route...
· Highlight the route number field
and select the route you wish to
delete with CLR.
· Highlight the route action field and
select “Clear?” with the CLR key.
· Press ENT to delete the route.
6.6 ACTIVE ROUTE
Active Leg
Waypoint List Cyclic Column:
- ETE
- ETA
- DTK
The Active Route Page displays the waypoints of the active route starting
with the “active from” and “active to” waypoints on the top line. Press the
ACTV softkey to select this page.
Distance