Filter
Top Products
8-9
To turn audio tones on/off...
· Highlight the tone option field.
· Press CLR to select the desired option.
You may also adjust the contrast of the GPS 95 display to your preferences.
To change the display contrast...
· Highlight “Change Contrast?” and press ENT.
· The contrast bar is highlighted. Press the left or right arrow key to
change the contrast level.
· When the desired contrast level is reached, press ENT.
The backlighting time-out determines the length of time the display and
keypad backlighting will remain on. If no keys are pressed for the specified
time, the backlighting will automatically shut off to conserve battery power.
To set the backlighting time-out...
· Highlight the backlighting time-out field.
· Enter the desired time for backlighting to remain on. If you wish to have
the backlighting on at all times, enter zero.
· Press ENT.
8.9 TRACK LOG SETUP (SETUPS)
The Track Log Setup Page is used to
configure the track log function. A
track log is a record of your flight path
showing where you have been up to
your present position. The cyclic fields
on line one allow you to turn the track
storage on or off, and determine how
the track log will be stored in memory.
The track storing function may be turned on and off by highlighting the first
status field and pressing CLR. From the next field, the track may be set to
“wrap” around through available memory (deleting the oldest track information
and using the memory to store the new track position), or to “fill” available
memory and then stop. The amount of memory used at any given moment
is also displayed. When available memory is filled or the track is no longer