Filter
Top Products
8-19
The final step is to enter speed and fuel flow rates. The GPS 95 will then
calculate the desired track (DTK), fuel requirements (REQ), distance (DIS),
and estimated time enroute (ETE).
To perform a trip and fuel plan, waypoint to waypoint...
· Highlight the first cyclic field (top
left), and press CLR to select
“WPTS:”.
· Highlight the waypoint name field
(second line), and enter the first
waypoint name followed by ENT.
· The second waypoint name field is
now highlighted. Enter the second
waypoint name followed by ENT.
· The speed (SPD) field is highlighted. Enter the planned speed, and
press ENT.
· The fuel flow (Flow) field is highlighted. Enter the estimated fuel flow
followed by ENT.
· The GPS 95 will now display the calculated figures.
To perform a trip and fuel plan for a route...
· Highlight the first cyclic field (top left)
and select “RTE” with CLR.
· Highlight the next cyclic field and
select the desired route number by
pressing CLR.
· Highlight the “Leg>” field and select
the desired leg, or select “All” for the
entire route, using CLR.
· Highlight the “SPD:” field and enter the planned speed, followed by
ENT.
· Highlight the “Flow:” field and enter the estimated fuel flow followed by
ENT.
· The GPS 95 will now display the calculated figures.
NOTE: When “all” is selected, no desired track (DTK) will be shown since
this value only applies to an individual leg.