Filter
Top Products
C-8
C.4 YOKE MOUNT OPERATION
Once installed on the yoke, the yoke mount may be adjusted to provide the
optimum viewing angle for your GPS 95.
To adjust the yoke mount viewing angle...
· Loosen the upper knob.
· Rotate the bracket up or down on the ratchet.
· Tighten the upper knob securely.
The yoke mount is designed to allow the GPS 95 to be installed either with
or without the battery pack attached.
To adjust the yoke mount to accept the GPS 95 with the battery pack
attached...
· Loosen the coinslot screw.
· Lower the cradle to its lowest position.
· Tighten the coinslot screw. When adjusted properly, the coinslot
screw should fit completely into the counterbore in the cradle so that
all surfaces are flush.