Filter
Top Products
C-10
· Disconnect the antenna or antenna cable.
· Apply enough force to the release tab to allow the unit to pass as shown
above.
· Pull the bottom of the GPS 95 out. Then rotate the top downward and
out.
NOTE: The portable antenna is removed by gripping the antenna at its base
(on the knurled knob) and rotating 1/4 turn counterclockwise. The antenna
will then pull straight off of the BNC connector on the side of the unit
C.5 SURFACE MOUNTING
The GPS 95 can also be fix-mounted to a surface using the surface mount.
Before permanent mounting, you may wish to apply power to the unit and
look at the display in the desired mounting location to ensure you have the
desired viewing angle.
To remove the cradle and power/data cable from the yoke mount...