Filter
Top Products
52
Service Manual
Third edition, June 1997
4. Select Backup All. A message is displayed on the screen
and the files are copied onto the diskette. Follow any
instructions on the screen.
3.32.2 Install Database and Pictures
Follow the instructions below if you need to install new or
backup copies of pictures and/or database on the Work
Station.
If you are uncertain of which files are stored on the diskette,
hit the View-button to view the files on the diskette.
Note: When there is a network of Work Stations, install must be
made on each Work Station in the network.
1. Slide the diskette with database and pictures into the
diskette drive.
2. Open the Install/Backup-window.
3. Hit the Install-button.
4. Select Install All from the menu.
5. A message is displayed. The files are copied from the
diskette onto the hard disk of the Work Station. Follow
any instructions on the screen.
6. Restart the Work Station.
7. Open the Up/Download Database-window described
in chapter 3.24 and download the database to the LCM
or LCMs.
3.32.3 Installing New Program to the Work Station
You may receive a diskette with a new version of the pro-
gram for the Work Station. In such a case follow the steps
below to install the new program:
1. Slide the diskette with the new program into the dis-
kette drive.
2. Open the Install/Backup-window.
3. Hit the Install-button.
4. Select Install All from the menu.
5. A message is displayed. The program is copied from the
diskette onto the hard disk of the Work Station.
6. Restart the Work Station.
3.32.4 Saving a Log-file to a Diskette
In the Group-window it is possible to log values to a file.
These files are possible to copy to a diskette. This could be
useful when fault finding the system. Follow the instruction
below to copy a log file to a diskette:
1. Insert a DOS formatted diskette into drive A.
2. Hit the Backup-button.