Filter
Top Products
20
Service Manual
Third edition, June 1997
Undo and Save. Any data that is changed in these windows
is stored according to the settings in the destination part of
the Level Unit-window described below. The Undo-button
will change an entry, but only if it has not been saved. Once
you press the Save-button you cannot undo the entry (unless
you enter the previous value and press save again).
3.8 Level Unit – Version Summary and Database Status
This window shows the version and status of the databases
and programs in the LCI and LCMs. You can also see if one
or two LCMs are used.
There are status boxes for the different programs as well as
the dates for the last changes of the database in the Level
Unit.
This information can be useful if you need to contact Saab
Marine Electronics or one of the service agents.
3.9 Level Unit – Transmitter Data
[Window/Level Unit/Register/Tank Data/Transmitter]
The Transmitter Data-window shows the dynamic data from
a Transmitter, as well as the Transmitter’s status. The various
tank distances stored in the database are displayed in this
window. You can change these values in this window. It is
also possible to set the Level Unit to a one-tank measurement
mode, see chapters 3.25 and 3.14. It is also possible to restart
the transmitter by hitting the Restart Tank-button.