Filter
Top Products
42
Service Manual
Third edition, June 1997
Database registers can be changed. Type in a new value and
hit the Save-button.
Note: You must be sure that you are changing the correct register,
as many of the registers lack a descriptor.
A list of a few of the database registers of the LCI is included
below:
Reg no. Name Description
00 Port_1_protocol To Work Station
01 Port_1_baudrate To Work Station
02 Port_1_databits To Work Station
03 Port_1_stop bits To Work Station
04 Port_1_parity To Work Station
05 Port_2_protocol To Service PC
06 Port_2_baudrate To Service PC
07 Port_2_databits To Service PC
08 Port_2_stop bits To Service PC
09 Port_2_parity To Service PC
10 LU_setup 0=fast update, 1= redundance
11 Relay_4_control 0=off, 1=on
12 Relay_5_control 0=off, 1=on
20 LCB_TrimList_corr 0=off, 1=on
21 LCB_ullage_unit 0=m, 1=feet
22 LCB_temp_unit 0=°C, 1=°F
23 LCB_press_unit 0=mbar, 1=PSI
50 LI_1_handler 0=none, 1=LCM1, 2=LCM2
51 LI_2_handler 0=none, 1=LCM1, 2=LCM2
52 LI_3_handler 0=none, 1=LCM1, 2=LCM2
53 LI_4_handler 0=none, 1=LCM1, 2=LCM2
100 Number of tanks
101 Display shutdown timeout in seconds