Filter
Top Products
41
Service Manual
Third edition, June 1997
3.21 Level Unit – Any Register
In this window you can view any of the registers in the
LCMs or the LCI. There are two types of registers, the dy-
namic registers and the database registers. There are four
buttons to select LCI or LCM and to select dynamic or data-
base registers. Hit one of these buttons.
The normally used registers are shown in the windows de-
scribed in this chapter 3. It is only for extraordinary service
actions that you would need to go directly to the register and
change data.
You can select if you want to see the registers in hexadecimal
or in decimal form. Normally decimal form is best.
Enter at which register you want the displayed list to start at
and how many registers you want to see (max 15 at a time).
Then hit the Read-button to display the registers you have
specified.