Filter
Top Products
19
Service Manual
Third edition, June 1997
3.7 The Service Windows of the Work Station Software
A number of the actions in the fault finding section at the end
of this manual suggest operations done on the Work Station.
The Service functions are protected by passwords. The Cap-
tain-password is required when:
- installing or backing up database and software in the
Service part of the Work Station software,
- downloading or uploading database to Level Unit or
Work Station in the Service part of the Work Station
software,
- adjusting IG pressure to zero in the Service part of the
Work Station software,
- disconnecting a channel,
- changing the Operator-password.
All other functions in the Service part of the Work Station
software require the Service-password. Contact Saab Marine
Electronics or one of the service agents to receive the Service-
password. See list of service agents in chapter 12.
Hit the Window-button at the top of the Work Station screen.
Hit the Service-item on the menu to open the Service sub-
menu. See figure 3-2.
In the service windows, the dynamic data and database
values are in separate boxes. Most of the data in the database
boxes can be changed. Where there is data that can be
changed (shown as underscored), there are two buttons;
Figure 3-2 shows the
Service menu and sub-
menu.